All Mobile Secret Unlock Codes Tips & tricks

All Mobile Secret Unlock Codes Tips & tricks

Alcatel Secret codes tips

How to enter my Unlock Code on Alcatel?
Model : Method Generic

1 - Switch ON your phone without SIM Card,
2 - Then compose : *#0000*CODE#,
3 - To finish compose : *#0001*CODE#.

Model : 531 & 535

1 - Switch ON your phone without SIM Card,
2 - Press * and without release compose 787292,
3 - A new menu "Unlock Network" will appear, then select "YES",
4 - Enter the Code we send to you.

Model : All other Alcatel

1 - Switch on your phone with a not allowed SIM Card,
2 - When the message "Enter Network Key" appear enter the Code we send to you


If the phone does NOT ask for the unlock code when you put in another simcard
you can enter the NCK in the following way:

BenQ Secret Codes Tips
How to enter my Unlock Code on BENQ?
Model : All Benq

1 - Switch ON your phone with a not allowed SIM Card,
2 - Enter the Unlock Code .
###765*08#YOUR CODE

BlackBerry Secret codes tips

How to enter my Unlock Code on BlackBerry?
Model : BlackBerry 8700

Go to the Menu -> Options -> Advanced Options -> Sim card
press select, while holding the Shift key (bottom right corner CAPS),
type mepd. You should now see the five locking categories listed, while
holding the alt key, type mep2. Release the alt key. You are now
prompted to enter the Network MEP code. Enter the code, enter
Return/Enter, the device should then be unlocked.

Model : BlackBerry 8800

***** You must have a SIM card in your phone to complete these steps ( Can be active or inactive ) *****

1 - Go to settings menu => and then Options
2 - Select Advanced options => and then Sim card
3 - Type MEPD using your Blackberry keyboard (NOTE: You will not see any text appear on the screen while typing MEPD)
4 - Hold the ALT Key while typing in MEPE on your Blackberry keyboard
(NOTE: You will not see any text appear on the screen while typing MEPD)
5 - You should be presented with a prompt "Enter Network MEP Code".
Type in the 16 digit unlock code received from UnlockBase.com and press
in the track wheel / jog dial to confirm
6 - Your phone is now unlocked

Model : BlackBerry 8100 Pearl

1 - Go to Options Menu => Advanced Options
2 - In the SIM Card menu, hold down the shift (right of the zero, cap) press meppd
3 - You'll see the unlocking level screen there you hold the ALT key (left side below @) type mepp2
4 - Enter the unlock code.


Model : BlackBerry 8100 (Vodafone Australia)

PLEASE READ THE INSTRUCTIONS CAREFULLY BEFORE YOU ATTEMPT ANY UNLOCK PROCESS

This procedure unlocks the handset from being network restricted from
only using SIM cards from Vodafone Australia. In case of difficulties,
please refer to the FAQ listed below

1. Take note of the unlocking code shown above

2. Insert a Non-Vodafone Australia working SIM card.

3. Ensure the phone is charged and then switch the phone on.

4. Optional Step: If the SIM card has a PIN, enter your PIN number. (See FAQ below)

5. The phone will then display a message. The most common is �Invalid SIM card�. (Different message? See FAQ below)

6. Select �Turn Wireless Off�

7. Select �Settings� Menu , then go to Advanced Options > SIM Card

8. Type alt-MEPT by holding the ALT-key and typing the letters MEPT with multitap i.e. type hold ALT, type {M}{ER}{OP}{OP}{TY}

9. When prompted with �Enter Network MEP code (255 left)� on the
screen, enter the 16-digit network unlock code provided for your phone,
then press Enter. (Unlocking code is shown above)

10. Reset the phone by pulling the battery

11. Switch the phone on and the handset will be unlocked automatically.
This will be confirmed if you can make and receive calls with the
Non-Vodafone Australia SIM card. (You will need reception and phone
credit with the different network provider)

Please Note:

If the unlocking code is entered incorrectly the next attempt to unlock
the device will be delayed for 10 seconds increments. The number of
unlocking attempts is limited to 255 tries only. When 255 attempts is
reached the phone will be permanently blocked.

To unblock the phone, it must be taken to a RIM service centre. No
outgoing calls including emergency call is possible when the phone is
blocked.

FAQ:

Question: My phone asks to enter a PIN number

Answer: For SIM cards with PIN ENBLED you will be required to enter a
PIN. This is not the unlocking code that has just been provided. For
information concerning the PIN, PIN2, PUK and PUK2 codes for a SIM card
please read the manual that came with your phone. This is not a handset
unlocking difficulty.

Question: My handset displays a different message then what is shown in
this procedure when I insert a Non Vodafone Australia SIM card.

Answer: The most common message the phone will display is �Invalid SIM
card�. Because each handset may have a different variation in software
there is no common message. If your handset displays a different
message it is recommended to move onto the next step. Note: Faulty SIM
Cards - The handset may also display messages indicating the SIM you
are using to unlock the handset is faulty, it could display �Insert
SIM� �Bad Card�, �Card Error� or �Card Rejected�, confirm the SIM card
is inserted correctly � Gold area downwards and the cut of the corner
matches correctly. You will need a working NonVodafone SIM card to
unlock the handset, Vodafone can not assists with other networks faulty
SIMs.

Question: I am outside of Australia and experiencing difficulties
unlocking the phone that I purchased from a Vodafone Australia outlet

Answer: Clearly note this in the difficulties description. Vodafone Australia can only send a reply to the difficulty by email.


Model : All BlackBerry

1 - Using the menu go to Settings Menu -> SIM card pressselect.
2 - While holding the SHIFT key, type mepd
3 - You should now see the five locking categories listed.
4 - While holding the SHIFT KEY, type mep2.
5 - Release the shift key.
6 - You are now prompted to enter the Network MEP code (it will also state how many attempts left)
7 - Enter the code
8 - Enter Return/Enter
9 - The device should then be unlocked

BlackJack Secret codes tips

How to enter my Unlock Code on Cingular BlackJack ?
Insert disallowed simcard (a simcard that the phone does not usaully accept) and enter unlock codes when prompted

NOTE: If you are unable to connect to service provider or unable to
make out going calls or recieve messages, this has nothing to do with
your phone being locked or not, you need to force the BlackJack to
change to GSM mode, this can be done as follows:

Power on your Phone

1. Enter *#1546792*#
2. Select Option 3 Network & Call Settings
3. Select option 5 Network Mode
4. Select GSM

This should resolve your problem.

DREAMPHONE Secret tips tricks here

How to enter my Unlock Code - DREAMPHONE - ?


Model : G500i

- Without sim card compose ####74656256 then green boutton
- wait 5s phone will ask for code.
- Enter Code

Bosch secret tips
How to enter my Unlock Code on Bosch?
Model : All Bosch

1 - Switch on your phone with a not allowed SIM Card,
2 - When the message "Enter Network Key" appear enter the Code we send to you.

Ericsson unlock tips tricks

How to enter my Unlock Code on Ericsson?
Model : All Ericsson

1 - Switch ON your phone without SIM Card,
2 - Press 1 time the left arrow,
3 - Press 2 times the button * ,
4 - Press 1 time the left arrow,
5 - The message "Personalize with MNC2" will appear,


6 - You can now enter the Unlock Code we send to you.


Handspring unlock tips tricks

How to enter my Unlock Code - Handspring - ?

model : Treo 180 & 270

without sim card compose : *#*# unlock Code #

HP iPaq Unlock Code Entry Instructions How to Enter
Unlock Codes on HP iPaq series phones (iPaq 6315, 6325, 6300, 6515 ,
etc) Step Action


1 Insert NON Cingular SIM into device
2 Power on the device
- Wait approximately 30 seconds until the SimLock application appears
(the delay may be longer if the user has already attempted an unlock
with the wrong code)
3 Enter the unlock code in the blank field
4 Press Ok
- If the unlock code is incorrect, an error dialog will appear. After
pressing Ok on this dialog, the user has to re-enter the unlock code
after delays (see above in Device Specific Information)
- If the unlock code is correct, a success dialog will appear.
5 Press Ok
- The device is now unlocked and should continue booting OR
1. On the Today screen, tap Start > Settings.
2. Tap the Phone Band icon.
3. Tap the Keyboard icon to open the virtual keyboard
4. Tap Shift and then Ctl key to enable the keys.
5. Tap the blank area below the band selection box to open the unlock tool.
6. Tap Shift and then Ctl to disable the keys.
7. Enter the 8-digit unlock code and tap OK when done.
8. Wait for the device to validate the unlock code (about five seconds). You will see one of the following screens:
1) Unlock successful.
2) Unlock failed due to incorrect code. The user has three attempts to
unlock. After three attempts, the device will refuse any more unlocking
attempts. Perform a soft reset to reset the counter to perform
additional unlocking attempts.
3) Device is not ready for unlocking. This error message displays when
the user tries to unlock when the phone application (not the device) is
not in a steady state. It takes 30 seconds after powering on the phone
for it to reach a steady state.

*If you already have an unlock code and sim card but when you input
code, it always says " unlock code not accepted, you have tried...."
You must update your ROM version . About 5% hp 6315 have this problem.
This problem can easy be resolved with this ROM update ( ROM v1.00.38 )
This rom update will remove all T-mobile logos and sofware and your 6315 will become OEM 6315
dowload link
1. Unzip/Extract it using your unzip program (i.e. WinRAR, WinZip, 7zip, etc...)
2. Place the h6315 in cradle. connect it to USB and charger
3. Double click on the hpRUU.exe to run the program
4. View the Readme and if you wish to proceed Agree to the Terms and Conditions
5. Click Next
6. Click Next again to flash the device with the new ROM.

KenWood Secret tips trick unlock.

How to enter my Unlock Code - KenWood - ?

Model : all

- Switch ON your phone with a not ACCEPTE SIM Card,
- Enter the Unlock Code .

LG fones Unlock Code tips tricks

How to enter my Unlock Code on LG Electronics ?
Model : LG KU990 Viewty

1. insert original sim card and turn phone on.
2. Press telephone icon at bottom of screen to bring up the phone keypad
3. Enter 2945#*990#
4. A menu will pop up, select sim unlock
5. Enter your unlock code and press ok
6. The phone will then reboot and the unlock is complete.

Model : LG CU400

1 - Insert SIM Card from a unsupported network provider,
2 - Power on the handset,
3 - Phone will display "Invalid SmartChip"
4 - In Idle screen, enter : 159753#*#
5 - Phone will display "Enter NCK, Remaining 5"
6 - Enter the 8 digit SIM Unlock code
7 - Select "OK"
8 - The handset is now successfully unlocked

Model : LG U8150

1 - Switch ON your phone with a NOT Allowed SIM Card,
2 - Compose : 2, 7, 7, 6, 3, 4, #, *, #,
3 - Go to menu "SIM Lock",
4 - Enter the Unlock Code we send to you.

Model : LG U400

1. Insert the network SIM in the handset which has given u the LG U400.
2. Enter 2945#*88110#.
3. The phone will then prompt 'Unlock sim'. Press OK.
4. The phone will then prompt 'Network Unlock'. Press OK.
5. The phone will then prompt- 'Input Network Control Key'.

Enter the 8 digit unlocking code. Press OK. If the unlocking code comes
with only 7 digits, add a 0 in front of the 7 digit code. If the
unlocking code comes with only 6 digits, add 00 in front of the 6 digit
code.

6. It should give you the message Success.
7. Come back to the main screen and Enter 2945#*88110#.
8. The phone will then prompt unlock sim. Press OK.
9. The phone will then prompt Network Unlock/ Lock but if you scroll down you will see a message Enter SP Lock. Enter SP Code.
10. Then press OK

Model : All other model

1 - Switch ON your phone with an Allowed SIM Card,
2 - Then compose :

2945#*5101# - (if you have a LG 510w)
1945#*5101# - (if you have a LG 1200 & B1200)
2945#*5221# - (if you have a LG 5200 & 52200)
2945#*5301# - (if you have a LG 5300)
2945#*5401# - (if you have a LG 5400)
2945#*70001# - (if you have a LG 7020)
2945#*7101# - (if you have a LG 7100)
2945#*1201# or 2945#*70001# - (if you have a LG 1100)
2945#*70001# - (if you have a LG7250T)
2945#*2201# - (if you have a LG C2200)
2945#*5301# - (if you have a LG T5100)
2945#*3311# - (if you have a LG C3310)

3 - Go to "Menu" and then to "Settings",
4 - Then select "Security",
5 - To finish select "Network Provider" and select "Desactivate"
6 - Enter the Unlock Code we send to you.

Model : To Classify

For the next models u must to insert the original SIM:

LG C3100 press 2945#*3101#
LG C3380 press 2945#*7101#
LG F2300 press 2945#*7101#
LG KE260 press 2945#*2601#
LG KE970 press 2945#*9701#
LG KG120 press 2945#*1201#
LG KG220 press 2945#*1201#
LG KG240 press 2945#*3311#
LG KG280 press 2945#*7101#
LG KG290 press 2945#*7101#
LG KG800 press 2945#*7101#
LG KU250 press 2945#*250#
LG KU380 press 2945#*380#

After that will appear an secret menu,go to settings-security- sim lock ,enter NCK and press OK.

For next models insert one SIM ,not the original SIM:
LG KU311 press 815118#*#
LG KU800 press 82652#*#
LG L600v press 815118#*#
LG U8150 press 277634#*#
LG U8210 press 277634#*#
LG U8500 press 277634#*#
Enter NCK and press OK.

How to enter my Unlock Code on Mitsubishi ?
Model : Trium Mars

1 - Swith ON your phone without SIM Card,
2 - Press * and without release compose : 787090 or 787292,
3 - The menu "Unlock Network" will appear,
4 - Select "YES" and enter the Unlock we send to you.

Model : Mitsubishi M341i

1 - Swith ON your phone with an Accepted SIM Card,
2 - Press * and without release compose : 787292,
3 - The menu "Unlock Network" will appear,
4 - Select "YES" and enter the Unlock we send to you.

Model : Mitsubishi M342i

1 - Swith ON your phone with an Accepted SIM Card,
2 - Press * and without release compose : 787090,
3 - The menu "Unlock Network" will appear,
4 - Select "YES" and enter the Unlock we send to you.

Mitsubishi fones unlock code tips & tricks

Model : All Mitsubishi

1 - Switch ON your phone without SIM Card,
2 - Press * and without release compose : 787292 or 78729,
3 - The menu "Unlock Network" will appear,
4 - Select "YES" and enter the Unlock we send to you.

Motorola Fones secret code unlock tips & tricks

How to enter my Unlock Code on Motorola ?
Model : All Motorola

1 - Switch ON your phone with a not allowed SIM Card,
2 - Phone show "Enter Special Code",
3 - You can now enter the Unlock Code we send to you.

WARNING : If one of theses messages appear :

- "Contact Service Provider"
- "Tampert Alter"
- "Wait before enter special Code"
- "Contact Service'

It's because you or somebody allready enter too many wrong codes, you
just have to let phone ON on theses errors messages and after 40 min to
2 hours maximum the message "Enter Code Special" will appear again !

Model : Motorola A1000 and other A models

1 - Click on the icon Phone
2 - Enter the following keys: ** 057 *
3 - Mobile displays "locking enter personalization"
4 - Enter the unlock code
5 - Click Ok

Model : Motorola L6i & L7i (not L6 and L7 without "i")

1 - Press and hold "*" key by dialing code 787090
2 - The mobile displays: "Menu. Network"
3 - Choose 'yes' and then press OK
4 - The mobile ask you for code.
5 - Enter the code for unlocking.

Nec fones unlock tips tricks


How to enter my Unlock Code on NEC ?
Model : Nec N342i

1 - Switch ON your phone without SIM Card,
2 - Compose : **00012*CODE#.

Model : All others NEC

1 - Switch ON your phone without SIM Card,
2 - Compose : #7320*CODE#.

Model : old NEC

1 - Switch ON your phone without SIM Card,
2 - Compose : #3210*CODE# and press Call Button.

Panasonic fones secret code tips tricks

How to enter my Unlock Code on Panasonic ?
Model : Panasonic GD67/68 & GD87/88 & x70 & P341i

1 - Switch ON your phone without SIM Card,
2 - Compose : 746 and press 2 times the button "OK",
3 - A new menu will appear, select "NCK",
4 - You can now enter the Unlock Code we send to you.

Mode : Panasonic G60

1 - Switch ON your Phone with a not allowed Accepted SIM Card
2 - Enter your PIN Code and Confirm
3 - Press a second time on OK button
4 - The phone now ask for Unlock Code !

Model : Panasonic GD50 & GD55

1 - Switch ON your phone without SIM Card,
2 - Compose : **00012*CODE#.

Model : Panasonic X60 & X400

1 - Switch ON your phone with an Accepted SIM Card,
2 - Compose : 52824**,
3 - A new menu will appear, select "NCK",
4 - You can now enter the Unlock Code we send to you.

or

1 - Switch ON your phone with an Accepted SIM Card,
2 - Compose : 52824**,
3 - Compose : 746 and press 2 times the button "OK",
4 - A new menu will appear, select "NCK",
5 - You can now enter the Unlock Code we send to you.

Model : Panasonic X100

1 - Switch ON your phone with an Accepted SIM Card,
2 - Compose : #*7465625*638*CODE#

Sharp unlock secret code tips tricks

How to enter my Unlock Code on Sharp ?
Model : All Sharp

01 - From front screen type *01763*6371#
02 - The handset will reset back to the main screen
03 - Press M button.
04 - Scroll to Settings and press SELECT.
05 - Scroll to Security and press SELECT.
06 - Scroll to MEP locks and press SELECT.
07 - Enter your Handset Code (the default code is 0000) and press OK.
08 - Scroll to Network and press SELECT.
09 - Scroll to Deactivate and press SELECT.
10 - Enter Unlock Code we send to you and press OK.
11 - Handset should then display DONE and be unlocked.

i found your codes but my mobile í alcatel hc1000.. i could not find any codes for alcatel mobiles. so i tried hêre to get the codes. http://www.unlock-free.com/ i got it from hêre for free of cost.